Highland Technology V380
From WikiProducts, the products encyclopedia
Contents |
Overview
The V380 is a VME/VXI compatible eight-channel strain-gage signal conditioner which is optimized for load-cell weighing applications. The module includes tare (zero reference), DSP-based high-order filtering, averaging, triggered weighing, and other functions not commonly available in conventional strain-gage signal conditioners. Filtering and averaging are programmable with fine granularity to allow precise optimization of high-speed weighing applications.
All module functions are programmable; except for the VME-bus address switch, the module has no jumpers, switches, or trimpots. All parameters, tare values, and calibration factors are retained in nonvolatile memory
Features
- Excites and measures up to eight strain gage load cells.
- Includes smart tare, calibration, and weigh functions.
- Onboard 32-bit processor supports digital filtering, triggered weighing, and custom computations.
- 16-bit (65536 count) resolution after tare compensation.
- Clean, logical VME bus interface is well suited to PLC-based weighing applications.
- Single-width 6U VME, B-size VXI module.
Specifications
| CONFORMANCE | ANSI/IEEE 1014-1987 VMEbus specification. Meets VXIC Rev. 1.4. and IEEE-P1155/D3 specifications. |
| SIZE | Single-width, 6U VME, B-size VXI module. |
| DEVICE TYPE | Register based slave: A16:D16:D08(EO). |
| ADDRESSING | 512-byte data block in bus A16 address range (VME short I/O space). Bus address is set by onboard dipswitch. |
| EXCITATION | Onboard remote-sensed bridge excitation source, 10-volt standard; 40mA max per-channel load. |
| INPUTS | Eight differntial inputs CMRR better than 100dB Input impedance is 60Mohms typ. Maximum input +-50mV (equivalent to 5mV/V excitation) |
| RESOLUTION | 16 bits (65536 counts) MAX after tare and cal. One 24-bit ADC per channel, 32-bit after filtering, 92.132 pV per LSB |
| TARE | On-demand, per-channel subtraction of reference weight up to full-scale signal range. |
| CALIBRATION | On-demand, per-channel normalization of output data to a customer-provided 16-bit engineering unit reference value. Tare and cal values are retained in nonvolatile memory. |
| FILTERING | Programmable digital filtering (Bessel in 0.1s, 0.2s, and 0.4s risetime) and averaging (last N samples). |
| OPTIONS |
Other excitations, signal ranges, filtering available. Special software functions are available. |
Manuals, drivers, downloads & other resources
http://www.highlandtechnology.com/DSS/V380DS.html
See also
V180 16-channel AC power analysis module. Measures true RMS volts, amps, watts, KWH, power factor, harmonics. Available in PC/AT format as model AT180.
V340 8-channel programmable sine wave/PWM generator with optional BIST.
V346 8-channel arbitrary waveform generator
V350 Function Generator provides 4 analog + 4 digital waveform generators w/ 1 Mword memory per channel
V360 8-channel frequency measurement module measures engine speed in high-noise industrial environments
V365 8-channel tachometer module measures engine speed and provides overspeed underspeed blocks
V370 4-channel programmable arbitrary waveform generator provides simulation of low-frequency waveshapes.
V375 4-channel programmable arbitrary waveform generator, adds user waveform input, burst mode, 300 kHz bandwidth.
V385 8-channel strain-gauge/load cell module. Includes 24-bit ADC and individual remotely-sensed excitation supply per channel. Excitation switchable between 5 and 10 volts.
V420 8-channel resistance simulator module
V450 16-channel analog input module can acquire a wide range of DC voltages, including thermocouple temperatures.
V460 16-channel current source and analog measurement module. Measures voltage, resistance, and bridge-type sensors. Includes engineering-unit linearization for platinum RTDs and cryogenic temperature-sensing diodes.
V470 16-channel analog output module provides programmable isolated outputs as voltage outputs, thermocouple simulation, or RTD signal conditioners.
V550 8-channel LVDT/RVDT physical position sensor; integral transducer excitation and programmable filtering; 16-bit resolution.
V660 12-channel B-size VME time-interval measurement module
V680 8-channel time interval measurement module; measures +/-6800 seconds from trigger with 48-picosecond resolution. Jitter below 40 ps.
V720 6-Channel VME Electrical-to-Optical Converter
V730 6-Channel VME Optical-toElectrical Converter
V850 4-channel digital delay/pulse generator. Provides programmable delays up to 167 ms with 40-picosecond resolution; features agile delay/width programming and jitter < 25 ps (typ).
V851 6-channel version of V850; optional NIM outputs.
V860 multichannel pulse amplifier with risetime of 400 ps at 10V typical.
V880 precision programmable delay generator for timing systems; 1 ps resolution, 3 ps RMS jitter, electrical or optical outputs.
Dealers, trainers, support, maintenance & service centers
Highland Technology, Inc.
United States
California
San Francisco
P: (415) 551-1700
F: (415) 551-5129
http://www.highlandtechnology.com
info@highlandtechnology.com
