Highland Technology V180

From WikiProducts, the products encyclopedia

Contents 1 Overview 2 Features 3 Specifications 4 Manuals, drivers, downloads & other resources 5 See also 6 Dealers, trainers, support, maintenance & service centers

Overview

The V180 is a single-width VME module that allows accurate and comprehensive measurement of AC power circuits. The V180 acquires powerline current and voltage inputs using approved current transformers and model C750 remote potential transducers. Up to sixteen CT sensors and eight potential connections (six lines plus two neutrals) can be accommodated: each CT may be combined with any potential pair to form sixteen virtual wattmeters. Each metering channel can acquire line voltage, current, true power, volt-amps, power factor, and kilowatt-hours; for polyphase circuits, multiple channels may be aggregated for power, KVA, power factor, and KWH measurements, allowing metering of up to six delta or four wye-connected 3-phase circuits simultaneously. All V180 measurements are true RMS. Power and KWH measurements have a usable dynamic range of over 10,000:1, allowing even small power flows to be resolved on high-current feeders.

The V180 includes eight digital I/Os that can be programmed to count or produce KWH pulses and +-5V analog input (12-bit resolution) capability. The on-demand waveform sampling option acquires real-time waveforms of any current and voltage pair, allowing detailed waveform examination and Fourier analysis of line harmonics. Temperature (RTD) and BTU measurement option also available. Accessories include a C760 field wiring termination panel, C750; 120-to-480-volt potential transducer unit and current transformer from 5 to 1200 amps.

The equivalent instrument is also available as an ISA PC-plugin module, the Highland Model AT180.

Features

• Measures up to sixteen AC power circuits.
• Built-in MC68332 microprocessor
• Measures true RMS amps, volts, watts, KVAs, kilowatt-hours, and power factor.
• Interfaces to up to sixteen current transformers and up to two model C750 multiphase potential transducers.
• Highside: lowside potential inputs freely programmable using any combinations of potential connections.
• Pulse counting and KWH pulse output capability.
• Analog input capability.
• Waveform acquisition option.
• Temperature (RTD) measurement option.

Specifications

MODEL V180 VME ELECTRICAL MEASUREMENT MODULE

CONFORMANCE	ANSI/IEEE 1014-1987 VMEbus specification. VXIC specification, Rev1.4.
DEVICE TYPE	Register based slave: A16:D16:D08(EO).
PACKAGING	Single-width, 6U VME or B-size VXI module.
POWER REQUIRED	+12 : 500mA; +5 : 3A; -12 : 500 mA
ADDRESSING	256-byte data block in bus A16 address range C000-FF80 hex: bus address set by onboard dipswitch.
I/O	8 voltage (potential) inputs 8 digital I/Os programmable as pulse counters, as KWH pulse outputs, or as general purpose I/O 16 CT inputs Options: 8 CT inputs and 8 CT/temperature inputs. CT inputs double as +-5V analog inputs.
PROCESSOR	High performance Motorola MC68332, 32-bit microcontroller.
CONNECTORS	One D37 female connector on front panel

Manuals, drivers, downloads & other resources

http://www.highlandtechnology.com/DSS/V180DS.html

See also

V340 8-channel programmable sine wave/PWM generator with optional BIST.

V346 8-channel arbitrary waveform generator

V350 Function Generator provides 4 analog + 4 digital waveform generators w/ 1 Mword memory per channel

V360 8-channel frequency measurement module measures engine speed in high-noise industrial environments

V365 8-channel tachometer module measures engine speed and provides overspeed underspeed blocks

V370 4-channel programmable arbitrary waveform generator provides simulation of low-frequency waveshapes.

V375 4-channel programmable arbitrary waveform generator, adds user waveform input, burst mode, 300 kHz bandwidth.

V380 8-channel strain-gauge/weighing module. Includes 24-bit ADC per channel, user-programming data filtering, tare, cal functions.

V385 8-channel strain-gauge/load cell module. Includes 24-bit ADC and individual remotely-sensed excitation supply per channel. Excitation switchable between 5 and 10 volts.

V420 8-channel resistance simulator module

V450 16-channel analog input module can acquire a wide range of DC voltages, including thermocouple temperatures.

V460 16-channel current source and analog measurement module. Measures voltage, resistance, and bridge-type sensors. Includes engineering-unit linearization for platinum RTDs and cryogenic temperature-sensing diodes.

V470 16-channel analog output module provides programmable isolated outputs as voltage outputs, thermocouple simulation, or RTD signal conditioners.

V550 8-channel LVDT/RVDT physical position sensor; integral transducer excitation and programmable filtering; 16-bit resolution.

V660 12-channel B-size VME time-interval measurement module

V680 8-channel time interval measurement module; measures +/-6800 seconds from trigger with 48-picosecond resolution. Jitter below 40 ps.

V720 6-Channel VME Electrical-to-Optical Converter

V730 6-Channel VME Optical-toElectrical Converter

V850 4-channel digital delay/pulse generator. Provides programmable delays up to 167 ms with 40-picosecond resolution; features agile delay/width programming and jitter < 25 ps (typ).

V851 6-channel version of V850; optional NIM outputs.

V860 multichannel pulse amplifier with risetime of 400 ps at 10V typical.

V880 precision programmable delay generator for timing systems; 1 ps resolution, 3 ps RMS jitter, electrical or optical outputs.

Dealers, trainers, support, maintenance & service centers

Highland Technology , Inc.

United States

California

San Francisco

P: (415) 551-1700

F: (415) 551-5129

http://www.highlandtechnology.com

info@highlandtechnology.com